Changes

[[image:Rossi_Focardi3.jpg|Andrea Rossi and Sergio Focardi (Picture: TV channel "Rainews24")|300px|thumb]]

[[image:Rossi_Focardi3.jpg|Andrea Rossi and Sergio Focardi (Picture: TV channel "Rainews24")|300px|thumb]]

[[image:John_Michell_Ecat.jpg|Planned book of a John Michell: Rossi's eCcat - Free Energy, Free Money, Free People. (Xecnet Verlag)|thumb]]

[[image:John_Michell_Ecat.jpg|Planned book of a John Michell: Rossi's eCcat - Free Energy, Free Money, Free People. (Xecnet Verlag)|thumb]]

The '''Focardi-Rossi Energy-Catalyzer''' (also ''E-Cat'' or ''Rossi Energy Amplifier'') is an alleged compact fusion reactor planned to be marketed in 2011. According to Italian inventors, alleged engineer(see below) Andrea Rossi<ref>Rossi: ''I am a doctor in the Philosophy of Science and Engineering from the Universita’ Degli Studi Di Milano''</ref> and Professor emeritus in physics Sergio Focardi, [[Cold Fusion|cold fusion]] of hydrogen and nickel was taking place in the reactor<ref>Andrea Rossi in his patent application, page&nbsp;12: ''the reaction actually provides a true nuclear cold fusion.''</ref>, which, at strong heat, led to the creation of copper. Rossi's 2011 demonstrations were criticized by various sources. Neither gamma nor neutron radiation could be measured<ref>http://www.psiram.com/doc/Levi%2C_Giuseppe_-_Report_on_heat_production_during_preliminary_tests_on_the_Rossi_Ni-H_reactor_%282010-2011%29.004810.pdf</ref>, and there is no proof of the creation of non-natural isotope ratios in the alleged fusion products. The respective experiments which should have shown energy production through "cold fusion", suffered from several methodic shortcomings and displayed contradicting statements. Independent tests, which might have proven a fusion process according to the said principle, failed so far. Specialist literature regarding the "energy-catalyzer" is not available (as of June 2011).

The '''Focardi-Rossi Energy-Catalyzer''' (also ''E-Cat'' or ''Rossi Energy Amplifier'') is an alleged compact fusion reactor planned to be marketed in 2011. According to Italian inventors, alleged engineer(see below) Andrea Rossi<ref>Rossi: ''I am a doctor in the Philosophy of Science and Engineering from the Universita’ Degli Studi Di Milano''</ref> and Professor emeritus in physics Sergio Focardi, [[Cold Fusion|cold fusion]] of hydrogen and nickel was taking place in the reactor<ref>Andrea Rossi in his patent application, page&nbsp;12: ''the reaction actually provides a true nuclear cold fusion.''</ref>, which, at strong heat, led to the creation of copper. Rossi's 2011 demonstrations were criticized by various sources. No gamma nor neutron radiation typical for fusion processes could be measured<ref>http://www.psiram.com/doc/Levi%2C_Giuseppe_-_Report_on_heat_production_during_preliminary_tests_on_the_Rossi_Ni-H_reactor_%282010-2011%29.004810.pdf</ref>, and there is no proof of the creation of non-natural isotope ratios in the alleged fusion products. The respective experiments which should have shown energy production through "cold fusion", suffered from several methodic shortcomings and displayed contradicting statements. Independent tests, which might have proven a fusion process according to the said principle, failed so far. Specialist literature regarding the "energy-catalyzer" is not available (as of Juli 2011).

In March 2011, a Greek business journal titled „Investor's World“ reported the concept was central to a speculative investment deal worth several hundred million Euro. Rossi, having got in conflict with the law previously, had also supplied thermoelectrical elements of an alleged miraculous efficiency which, however, displayed merely average properties when tested.

In March 2011, a Greek business journal titled „Investor's World“ reported the concept was central to a speculative investment deal worth several hundred million Euro. Greek startup "Defkalion is currently (July 2011) offering state licenses for commercialization of the invention at a price of 40.5 million Euros per country.<ref>July 6th, 2011<br>Dear interested party,<br>You have received this email because you have shown an initial interest for commercial involvement with our company and our products based on Andrea Rossi’s e-Cat invention (exothermic reaction between Hydrogen and Nickel). Many have signed non disclosure agreements with us and others are in the process of doing so. We offer you the possibility to meet with us prior to our public announcement that we accept international expressions of interest through our website as of September 2011.<br>

Regarding exclusivity, having received expressions of interest from 63 countries and more than 850 companies, we decided to change our non-exclusivity approach so that due diligence and selection of multiple partners in any given country is the responsibility off the country rights holder. As such, we will only sign agreements with one company per country. Any additional factories will pass through this partner.<br>--- ---<br>Regarding our international sales approach, it is as follows:

 We sell the rights to manufacture our products exclusively to one company for a given country at a fixed royalty price of 40.5 million Euros per factory producing 300,000 units annually. Within this price, we will:<br>

o Provide transfer-of-knowledge (production, technical, after sales, maintenance) both in Greece as well as on location

 Local company partnerships, marketing, points of sales, technical support remains the responsibility of the country rights holder.

 If additional factories need to be built, the same principles remain.

 Our business and pricing is structured to create lucrative win-win opportunities for all.<br>

The actual inventor of the principle was Italian biophysicist Francesco Piantelli in 1989 who filed patent applications in 1995 and 2010.<ref>Piantelli, F., ''Energy Generation and Generator by Means of Anharmonic Stimulated Fusion''. Patent EP 0767962 B1, 1995. [https://data.epo.org/publication-server/pdf-document?PN=EP0767962%20EP%200767962&iDocId=4823352&iepatch=.pdf]</ref><ref>WO 2010058288 A1: METHOD FOR PRODUCING ENERGY AND APPARATUS THEREFOR. 2010-05-27. Erfinder: PIANTELLI SILVIA; PIANTELLI FRANCESCO</ref> Rossi, who also attempts to have his invention patented, does not acknowledge that: ''"My process has nothing to do with the process of Piantelli. The proof is that I am making operating reactors, he is not."'' Piantelli's patent expert commented in May 2011 that Rossi had no chance to have the functional principle patented since Piantelli already held a patent on it since 1995.<ref>Angelo Saso: La magia del signor Rossi, Rainews24 May 3, 2011</ref> Some aspects of the claimed functional principle also happen to be similar to descriptions in a patent registered by Yoshiaki Arata in Japan dated July 2005 (see below). A remote similarity to the [[CETI Patterson Power Cell]] can also be established.

 

 

 

The actual inventor of the principle was Italian biophysicist Francesco Piantelli in 1989 who filed patent applications in 1995 and 2010.<ref>Piantelli, F., ''Energy Generation and Generator by Means of Anharmonic Stimulated Fusion''. Patent EP 0767962 B1, 1995. [https://data.epo.org/publication-server/pdf-document?PN=EP0767962%20EP%200767962&iDocId=4823352&iepatch=.pdf]</ref><ref>WO 2010058288 A1: METHOD FOR PRODUCING ENERGY AND APPARATUS THEREFOR. 2010-05-27. Erfinder: PIANTELLI SILVIA; PIANTELLI FRANCESCO</ref> Rossi, who also attempts to have his invention patented, does not acknowledge that: ''"My process has nothing to do with the process of Piantelli. The proof is that I am making operating reactors, he is not."'' Piantelli's patent expert commented in May 2011 that Rossi had no chance to have the functional principle patented since Piantelli already held a patent on it since 1995.<ref>Angelo Saso: La magia del signor Rossi, Rainews24 May 3, 2011</ref> Some aspects of the claimed functional principle also happen to be similar to descriptions in a patent registered by Yoshiaki Arata in Japan dated July 2005 (see below). A remote similarity to the [[CETI Patterson Power Cell]] and to the [[Zirconium fusion reactor of Bolotov]] can also be established.

==Purported functional principle==

==Purported functional principle==

According to Rossi, 100&nbsp;grammes of nickel powder were consumed over a period of six months at 10&nbsp;kW (therm.) output. The cost for the "fuel" thus amounted to 2&nbsp;Euro.<ref>Nyteknik-Chat 12.03.2011, [http://www.nyteknik.se/nyheter/energi_miljo/energi/article3124295.ece]</ref> An E-cat will cost about 2,000&nbsp;Euro per kW output (a 10&nbsp;kW-model thus will amount to 20,000&nbsp;Euro). In the North American radio chat show "Coast to Coast&nbsp;AM", known for propagating [[Conspiracy Theory|conspiracy theories]], Rossi said in March 2011 his planned 1&nbsp;MW small power station will cost 2&nbsp;million Dollars, while his 10&nbsp;kW E-Cat later will cost a mere 5,000&nbsp;Dollars.<ref>Interview with Andrea Rossi, Talk Radio "Coast to Coast&nbsp;AM", on March&nbsp;23, 2011 [http://www.coasttocoastam.com/article/rossi-cold-fusion-device]</ref> According to Greek journal "Investor's World" of March 2011, future "E-cat" devices will produce electrical energy through an "inverter". Customers were to face an annual cost of 1,300 Euros for the production of a 24/7 output of 20&nbsp;kW (not specified whether thermal or electric). "Defkalion Green Technologies" plans to request inclusion into the "renewable energy" programme by RAE (Regulatory Authority for Energy).<ref name="talefta">[http://talefta.blogspot.com/2011/03/new-mainstream-coverage-of-e-cat-and.html Blog about the "Investors World" article]</ref><ref name="scan">[http://www.xanthipress.gr/eidiseis/politiki/6874-xynidis-ependysi-hyperion-xanthi-ydrogono-nikelio-paragogi-energeias-ergostasio-xanthi.html Coverage and scan of the article in "Investors World"] (Greek)</ref><ref name="Investors World Article">Article in Greek journal "Investors World" of March&nbsp;12, 2011, pages 20-21</ref>

According to Rossi, 100&nbsp;grammes of nickel powder were consumed over a period of six months at 10&nbsp;kW (therm.) output. The cost for the "fuel" thus amounted to 2&nbsp;Euro.<ref>Nyteknik-Chat 12.03.2011, [http://www.nyteknik.se/nyheter/energi_miljo/energi/article3124295.ece]</ref> An E-cat will cost about 2,000&nbsp;Euro per kW output (a 10&nbsp;kW-model thus will amount to 20,000&nbsp;Euro). In the North American radio chat show "Coast to Coast&nbsp;AM", known for propagating [[Conspiracy Theory|conspiracy theories]], Rossi said in March 2011 his planned 1&nbsp;MW small power station will cost 2&nbsp;million Dollars, while his 10&nbsp;kW E-Cat later will cost a mere 5,000&nbsp;Dollars.<ref>Interview with Andrea Rossi, Talk Radio "Coast to Coast&nbsp;AM", on March&nbsp;23, 2011 [http://www.coasttocoastam.com/article/rossi-cold-fusion-device]</ref> According to Greek journal "Investor's World" of March 2011, future "E-cat" devices will produce electrical energy through an "inverter". Customers were to face an annual cost of 1,300 Euros for the production of a 24/7 output of 20&nbsp;kW (not specified whether thermal or electric). "Defkalion Green Technologies" plans to request inclusion into the "renewable energy" programme by RAE (Regulatory Authority for Energy).<ref name="talefta">[http://talefta.blogspot.com/2011/03/new-mainstream-coverage-of-e-cat-and.html Blog about the "Investors World" article]</ref><ref name="scan">[http://www.xanthipress.gr/eidiseis/politiki/6874-xynidis-ependysi-hyperion-xanthi-ydrogono-nikelio-paragogi-energeias-ergostasio-xanthi.html Coverage and scan of the article in "Investors World"] (Greek)</ref><ref name="Investors World Article">Article in Greek journal "Investors World" of March&nbsp;12, 2011, pages 20-21</ref>

[[image:RF_Ferrara.jpg|First experiments with an „ECat“ predecessor by EON in Bondeno(Ferrara). See „reactor“ on the right, cooled in a bucket of water. (Picture: S. Focardi, May 2011 [http://it.paperblog.com/la-fusione-fredda-e-tornata8230-371137/])|350px|thumb]]

[[image:RF_Ferrara.jpg|First experiments with an „ECat“ predecessor by EON in Bondeno(Ferrara). See „reactor“ on the right, cooled in a bucket of water. (Picture: S. Focardi, May 2011 [http://it.paperblog.com/la-fusione-fredda-e-tornata8230-371137/])|350px|thumb]]

"Anomalies" when adding hydrogen to nickel have been reported since 1936. 1989 was marked by wide media attention to cold fusion as a result of claims regarding failed experiments by Fleischmann and Pons. In the same year, Italian biophysicist Francesco Piantelli (formerly University of Siena) believed to have incidentally observed a strong heat emission with temperatures above 1,450°&nbsp;C during an experiment with organic material which came into contact with nickel and hydrogen (nickel is used in industry as a catalyst for fat hardening with hydrogen), which he was not able to explain. The incident was reported by several Italian daily papers. In 1995, Piantelli received a "Truffle Prize" for his observations during a "Workshop on Anomalies in Hydrogen / Deuterium Loaded Metals".<ref>"Truffle Prize", second Asti Workshop on Anomalies in Hydrogen / Deuterium Loaded Metals, 1995</ref> Various workgroups have done experiments with electrolysis and with nickel and hydrogen since then.

"Anomalies" when adding hydrogen to nickel have been reported since 1936. 1989 was marked by wide media attention to cold fusion as a result of claims regarding failed experiments by Fleischmann and Pons. In the same year, Italian biophysicist Francesco Piantelli (formerly University of Siena) believed to have incidentally observed a strong heat emission with temperatures above 1,450°&nbsp;C during an experiment with organic material which came into contact with nickel and hydrogen (nickel is used in industry as a catalyst for fat hardening with hydrogen), which he was not able to explain. The incident was reported by several Italian daily papers. In 1995, Piantelli received a "Truffle Prize" for his observations during a "Workshop on Anomalies in Hydrogen / Deuterium Loaded Metals".<ref>"Truffle Prize", second Asti Workshop on Anomalies in Hydrogen / Deuterium Loaded Metals, 1995</ref> Various workgroups have done experiments with electrolysis and with nickel and hydrogen since then.

According to information from an Italian blog the ECat was connected by two power cables to a control unit. The power taken from the mains supply was 805 Watt (230 V / 3.5 A). According to Rossi, heating power was just 748 W, but he falsely assumes a voltage of 220 V (220 x 3,4 A = 748 W). Voltage in Italy is 230 V for 10 years now. A voltage of more than 230 V was measured in the showrooms several times. Rossi specified the entire heating output of the reactor at 5 kW, which would correspond to an "energy efficiency" of 6.7 times the input.  

According to information from an Italian blog the ECat was connected by two power cables to a control unit. The power taken from the mains supply was 805 Watt (230 V / 3.5 A). According to Rossi, heating power was just 748 W, but he falsely assumes a voltage of 220 V (220 x 3,4 A = 748 W). Voltage in Italy is 230 V for 10 years now. A voltage of more than 230 V was measured in the showrooms several times. Rossi specified the entire heating output of the reactor at 5 kW, which would correspond to an "energy efficiency" of 6.7 times the input.  

At an ambient temperature of 31.8 degrees Celsius water with a temperature of 26.5 degrees using the already known pump from LMI had been heated to 100,1 degrees and all water was evaporated. The same impropable value for water flow of 7 kg/h(117 gr/min, 1,94 gr/s) is claimed by Rossi once more. Watching a video taken by observer Steven Krivit however, shows that pump frequency was about 20-24 strokes/min.<ref>http://www.youtube.com/watch?v=m-8QdVwY98E</ref> Thus water flow had to be below 48 grams per minute (or 0.8g/s, 2.88 kg/h). In a picture taken by observer Passerini a pumping rate of 40 is visible (80 ml/min, 1.33 ml/s, 4.8 l/h). It remains unclear however, whether the picture was taken during the experiment. The temperature curve of the cooling water cannot be brought into a meaningful relationship to the claimed flow rate of 7kg/h: Cooling water comes from a water canister with an about 25 cm long temperature sensor plugged in from the top. When the water is pumped away, the probe gets out of the water and takes up air temperature quickly. A screenshot of the temperature curve on the notebook shows that quite a lot of water was drained during the first half of the day, so that the probe hang in the air soon. In the afternoon water flow as throttled apparently. For at least three hours the probe was in water(about 12:00 to 15:00). This means that in these three hours at most 9 liters of water (calculated from the dimensions of the canister and the length of the probe) were drained, which would be about 3 liters per hour and correspond to the calculated value from the audible stroke frequency of the pump. To get to 7 liters/h someone would have had to secretly pour 4 liters of water with 26.5 degrees into the canister. Adding colder tap water would have shown in the temperature curve.

At an ambient temperature of 31.8 degrees Celsius water with a temperature of 26.5 degrees using the already known pump from LMI had been heated to 100,1 degrees and all water was evaporated. The same improbable value for water flow of 7 kg/h(117 gr/min, 1.94 gr/s) is claimed by Rossi once more. Watching a video taken by observer Steven Krivit however, shows that pump frequency was about 20-24 strokes/min.<ref>http://www.youtube.com/watch?v=m-8QdVwY98E</ref> Thus water flow had to be below 48 grams per minute (or 0.8g/s, 2.88 kg/h). In a picture taken by observer Passerini a pumping rate of 40 is visible (80 ml/min, 1.33 ml/s, 4.8 l/h). It remains unclear however, whether the picture was taken during the experiment. The temperature curve of the cooling water cannot be brought into a meaningful relationship to the claimed flow rate of 7kg/h: Cooling water comes from a water canister with an about 25 cm long temperature sensor plugged in from the top. When the water is pumped away, the probe gets out of the water and takes up air temperature quickly. A screenshot of the temperature curve on the notebook shows that quite a lot of water was drained during the first half of the day, so that the probe hang in the air soon. In the afternoon water flow as throttled apparently. For at least three hours the probe was in water(about 12:00 to 15:00). This means that in these three hours at most 9 liters of water (calculated from the dimensions of the canister and the length of the probe) were drained, which would be about 3 liters per hour and correspond to the calculated value from the audible stroke frequency of the pump. To get to 7 liters/h someone would have had to secretly pour 4 liters of water with 26.5 degrees into the canister. Adding colder tap water would have shown in the temperature curve.

Krivit published a disappointing preliminary report three days later.<ref>Krivit S.B.: ''Preliminary Report of Interviews with E-Cat Trio Rossi, Focardi and Levi''. June 16, 2011. New Energy Times Blog. [http://blog.newenergytimes.com/2011/06/16/preliminary-report-of-interviews-with-e-cat-trio-rossi-focardi-and-levi/]</ref> According to his preliminary report the steam outlet was not visible and ended directly in a drain. Only when a black hose was removed from the drain (Rossi was careful to lift the hose to let any water in the hose run down the drain) "white steam" could be seen exiting the hose.  100 % dry steam is invisible, white steam is a sign for condensed for condensed water droplets.  

Krivit published a disappointing preliminary report three days later.<ref>Krivit S.B.: ''Preliminary Report of Interviews with E-Cat Trio Rossi, Focardi and Levi''. June 16, 2011. New Energy Times Blog. [http://blog.newenergytimes.com/2011/06/16/preliminary-report-of-interviews-with-e-cat-trio-rossi-focardi-and-levi/]</ref> According to his preliminary report the steam outlet was not visible and ended directly in a drain. Only when a black hose was removed from the drain (Rossi was careful to lift the hose to let any water in the hose run down the drain) "white steam" could be seen exiting the hose.  100 % dry steam is invisible, white steam is a sign for condensed for condensed water droplets.  

:''..Probably this journalist has been sent by someone that wants to dwarf our work. He also tried to blackmail prof. Levi, and Levi already has given to his attorney due. information..''<ref>Dear Craig:<br>Mr Krivit has understood nothing of what he saw, from what I have read in his ridiculous report… This guy has seen for half an hour an E-Cat in the factory where we make many tests, made some questions to Prof. Levi, Prof. Focardi and me. Evidently has understood nothing, perhaps for the short time we gave him, also because we have to work. Prof. Levi has explained very well to him how the measures have been made and the importance of the issue. He has explained very well that the percentage of uncondensed water in the steam has been measured in weight (in volume is impossible, for various reasons), and he also got confirmation of this from a specialist from whom he has taken indipendent counsel. Nevertheless, he has understood nothing, or wanted not to understand, for reasons he better knows. Our tests have been performed by Physics Professors, who know how to make measures , and I am measuring the performance every day on 300 reactors.<br>In any case we will start our 1 MW plant in october and we will see how it works. Of course I assure his considerations are invalid, but I want to say more: our products on the market will confirm this. Probably this journalist has been sent by someone that wants to dwarf our work. He also tried to blackmail prof. Levi, and Levi already has given to his attorney due. information .<br>Warm Regards,<br>A.R.<br>17 giugno 2011 11:48</ref>  

:''..Probably this journalist has been sent by someone that wants to dwarf our work. He also tried to blackmail prof. Levi, and Levi already has given to his attorney due. information..''<ref>Dear Craig:<br>Mr Krivit has understood nothing of what he saw, from what I have read in his ridiculous report… This guy has seen for half an hour an E-Cat in the factory where we make many tests, made some questions to Prof. Levi, Prof. Focardi and me. Evidently has understood nothing, perhaps for the short time we gave him, also because we have to work. Prof. Levi has explained very well to him how the measures have been made and the importance of the issue. He has explained very well that the percentage of uncondensed water in the steam has been measured in weight (in volume is impossible, for various reasons), and he also got confirmation of this from a specialist from whom he has taken indipendent counsel. Nevertheless, he has understood nothing, or wanted not to understand, for reasons he better knows. Our tests have been performed by Physics Professors, who know how to make measures , and I am measuring the performance every day on 300 reactors.<br>In any case we will start our 1 MW plant in october and we will see how it works. Of course I assure his considerations are invalid, but I want to say more: our products on the market will confirm this. Probably this journalist has been sent by someone that wants to dwarf our work. He also tried to blackmail prof. Levi, and Levi already has given to his attorney due. information .<br>Warm Regards,<br>A.R.<br>17 giugno 2011 11:48</ref>  

Physicists Levi responded with an open letter in bumpy English to Krivit, in which he accused him of having not understood his expantations. Also Krivit had not understood, that the water content in the steam was measured as a ration of the masses involved.<ref>Dear Mr. Krivit  

Physicists Levi responded with an open letter in bumpy English to Krivit, in which he accused him of having not understood his explanations. Also Krivit had not understood, that the water content in the steam was measured as a ration of the masses involved.<ref>Dear Mr. Krivit  

Carefully I have read your preliminary report on your travel to Bologna .  

Carefully I have read your preliminary report on your travel to Bologna .  

==AmpEnergo==

==AmpEnergo==

[[image:Coldstream_Park_Office_Park.jpg|Coldstream Park Office Park (Image: NAI Norwood Group, Bedford NH [http://www.nainorwoodgroup.com/propdocs/116%20South%20River%20Road%20Building%20A.pdf])|300px|thumb]]

[[image:Coldstream_Park_Office_Park.jpg|Coldstream Park Office Park (Image: NAI Norwood Group, Bedford NH [http://www.nainorwoodgroup.com/propdocs/116%20South%20River%20Road%20Building%20A.pdf])|300px|thumb]]

US startup company AmpEnergo Inc., founded on April 20, 2009 in Bedford, New Hampshire<ref>AmpenErgo Inc, 116-G South River Road, Bedford NH 03110</ref><ref>President: Karl Norwood, founders and main shareholders: Karl Norwood (NAI Norwood Group, Inc.), Richard Noceti (LTI-global.com), Robert Gentile and Craig Cassarino. Minority shareholder: Ronald Engleman</ref> (Website: [http://ampenergo.com/]) signed a contract with inventor Andrea Rossi in March 2011. While "Leonardo Corp." is to build the energy catalyzers, marketing is planned to be done through AmpEnergo. According to Swedish journal Nyteknik, Rossi received a fincancial grant from this company.<ref>http://www.nyteknik.se/nyheter/energi_miljo/energi/article3179019.ece</ref> According to information from the press, AmpEnergo is currently looking for inventors.  

US startup company AmpEnergo Inc., founded on April 20, 2009 in Bedford, New Hampshire<ref>AmpenErgo Inc., 116-G South River Road, Bedford NH 03110</ref><ref>President: Karl Norwood, founders and main shareholders: Karl Norwood (NAI Norwood Group, Inc.), Richard Noceti (LTI-global.com), Robert Gentile and Craig Cassarino. Minority shareholder: Ronald Engleman</ref> (Website: [http://ampenergo.com/]) signed a contract with inventor Andrea Rossi in March 2011. While "Leonardo Corp." is to build the energy catalyzers, marketing is planned to be done through AmpEnergo. According to Swedish journal Nyteknik, Rossi received a fincancial grant from this company.<ref>http://www.nyteknik.se/nyheter/energi_miljo/energi/article3179019.ece</ref> According to information from the press, AmpEnergo is currently looking for inventors.  

The address of AmpEnergo is "Coldstream Park Office Park" owned by real estate company NAI Norwood<ref>http://www.nainorwoodgroup.com/propdocs/116%20South%20River%20Road%20Building%20A.pdf</ref>. According to owners, the building is heated with an electrically operated heat pump. The address is identical with that of real estate company NAI Norwood Group and of Norwood Management Karl Norwood Inc., owned by real estate agent Karl Norwood.<ref>NORWOOD MANAGEMENT KARL NORWOOD INC, 116 S RIVER RD UNIT A, Bedford, New Hampshire 03110</ref><ref>NAI Norwood Group, Inc., 116 South River Road, Bedford NH 03110</ref> and also of Leonardo Corp. and Leonardo Technologies Inc.<ref>LEONARDO TECHNOLOGIES, INC., 116 S River RD, BEDFORD, NH 031106734</ref> owned by Andrea Rossi. The phone numbers of all those companies are identical too ( (603) 668 7000). Despite having been founded in 2009 already , no phone number is known for AmpEnergo Inc. The company is not registered in any phone book or yellow pages in the USA. (as of May 2011)

The address of AmpEnergo is "Coldstream Park Office Park" owned by real estate company NAI Norwood<ref>http://www.nainorwoodgroup.com/propdocs/116%20South%20River%20Road%20Building%20A.pdf</ref>. According to owners, the building is heated with an electrically operated heat pump. The address is identical with that of real estate company NAI Norwood Group and of Norwood Management Karl Norwood Inc., owned by real estate agent Karl Norwood.<ref>NORWOOD MANAGEMENT KARL NORWOOD INC, 116 S RIVER RD UNIT A, Bedford, New Hampshire 03110</ref><ref>NAI Norwood Group, Inc., 116 South River Road, Bedford NH 03110</ref> and also of Leonardo Corp. and Leonardo Technologies Inc.<ref>LEONARDO TECHNOLOGIES, INC., 116 S River RD, BEDFORD, NH 031106734</ref> owned by Andrea Rossi. The phone numbers of all those companies are identical too ( (603) 668 7000). Despite having been founded in 2009 already , no phone number is known for AmpEnergo Inc. The company is not registered in any phone book or yellow pages in the USA. (as of May 2011)